Care and Cleaning
Titanium apatite deodorizing filter
1.
Open the f
pull out the air filters.
2.
Take off the titanium apatite
deodorizing filter.
• Hold the recessed pa
the 4 claws.
Claw
C
3.
Clean or replace the
titanium apatite
deodorizing filter.
[Cleaning]
3-1 Vacuum dust, and soak in lukewarm
water or water for about 10 to
15 minutes if very dirty.
3-2 After washing, shake off remaining
water and let them dry in the shade.
• Do not wring out the filter to remove water from it.
23
ront panel and
Page 21,22
rts of the frame and unhook
[Replacement]
Remove the filter from the filter
frame and atta
•
Do not throw away the filter frame. Reuse the filter
frame when replacing the titanium apatite
deodorizing filter.
•
When attaching the filter, check that the filter is
prope
rly set in the tabs.
•
Dispose of the old filter as non-flammable waste.
4.
Set the titanium apatite
deodorizing filter as
they were.
5.
Set the air filters as they
were.
6.
Close the front panel slowly.
NOTE
•
Operation with dirty filters:
− cannot deodorise the air,
− cannot clean the air,
− results in poor heating or cooling,
− may cause odour.
•
Dispose of old filters as non-flammable waste.
•
To order a titanium apatite deodorizing filter, contact
the dealer where
you bought the air conditioner.
Titanium apatite deodorizing filter
Item
(without frame) 1 set
Part No.
ch a new one.
Page 22
Page 21
KAF970A46