Adjusting the Airflow Rate
NOTE
■
Notes on airflow direction setting
• The movable range of the flaps varies according to the operation modde.
In DRY mode or COOL mode
Stop operation
0˚
COMFORT AIRFLOW
5˚
Upper limit (SWING)
45˚
Lower limit (SWING)
■
Note on airfl ow rate setting
•
At smaller airflow rates, the cooling (heating) effect is also smaller.
13
You can adjust the airflow rate to increase your comfort.
■
To adjust the airfl ow rate setting
Press
• Each pressing of
Auto
High
•
When the airflow is set to "
from the unit will become quiete
•
In indoor unit quiet operation, the airflow rate is set to a weak level.
•
If the temperature dose not reach the desired point, change the airflow rate setting.
•
In DRY mode, the airflow rate setting is not available.
In HEAT mode
Stop operation
Upper limit (SWING)
Lower limit (SWING)
COMFORT AIRFLOW
.
change the airflow rate setting in sequence shown below.
Indoor unit quiet
Low
Middle high
Middle
", indoor unit quiet ope
r.
0˚
15˚
50˚
45˚
Middle low
ration will start and the noise
In FAN mode
Stop operation
0˚
5˚
Upper limit (SWING)
45˚
Lower limit (SWING)