Toyota PRIUS 2014 Manual page 285

Driving in Eco drive mode
■
The multi-information display will automatically switch the display to Hybrid
System Indicator, regardless of which display is currently being shown.
(P. 270)
Touch tracer display (if equipped)
■
●
The touch tracer display can be set to not display even if the steering
switches are touched.
●
Only the circular, rubber-covered switches have a built-in touch sensor.
Touching any of the other switches will not display the touch tracer dis-
play.
Display settings can be changed when
■
The vehicle speed is less than approximately 5 mph (8 km/h).
Engine speed
■
On hybrid vehicles, engine speed is precisely controlled in order to help
improve fuel efficiency and reduce exhaust emissions etc. There are times
when the engine speed that is displayed may differ even when vehicle oper-
ation and driving conditions are the same.
When the 12-volt battery is disconnected
■
The following data will be reset.
●
Average fuel consumption
●
Distance to empty
●
Average vehicle speed
●
EV driving ratio
●
Clock
●
Display settings
●
Trip meter
PRIUS PHV_OM_OM47856U_(U)
2-2. Instrument cluster
285
2