Bissell PET 3 User Manual page 8

Operations
Cleaning with attachments continued
c. If possible, check upholstery stuffing.
Coloured stuffing may bleed through fabric
when wet.
d. Plan activities to allow upholstery time
to dry.
e. Remove loose dirt and impediments.
2. Follow the instructions on page 6 for filling
the tank.
3. Set the ReadyTools dial to the "TOOLS"
setting.
4. Attach the cleaning tool to the end of
the hose.
5. Plug in and turn the power switch to the
ON position.
6. Clean by pressing the spray trigger to spray
solution onto the area to be cleaned. Slowly
move the tool back and forth over the soiled
surface. Release the spray trigger to suction dirty
water. Continue to clean in the area, working in
small sections, until dirt is removed.
Caution: Do Not Overwet.
7. When finished cleaning, remove and rinse
tool(s) in clean, running water.
8. It is recommended that you suction clean
water from a bowl or from the tap to rinse
out the hose.
9. Lift end of hose and stretch out to ensure
all water is cleared from hose.
10. Wrap flex hose around hose wrap.
11. Empty collection tank and rinse out,
following instructions on page 9
under "Cleaning after use."
12. Return ReadyTools dial to "FLOOR
CLEANING" setting.
8
www.BISSELL.com
3.
4.
8. 9.