Bissell POWERFORCE 2089 Series User Manual page 6

Assembly
WARNING
Do not plug in your deep cleaner until you are familiar with all instructions
and operating procedures.
The only tool you will need to assemble
your cleaner is a Phillips screwdriver.
1
Slide upper body
onto lower body.
4
Be sure to secure upper
handle before lifting. Rotate
lock collar to secure.
Tips Before Carpet Cleaning
• If cleaning an entire room, consider moving your furniture to another area.
• Use a dry vacuum cleaner over area before using your deep cleaner.
• Remove any large, solid debris before wet cleaning.
• Pre-treat stains with BISSELL PreTreat to improve performance on coffee
stains and ground-in dirt.
6
www.BISSELL.com
2
Secure with screws.
5
Place Clean Water
Tank on back of unit.
The tank will make a
"CLICK" noise when
seated properly.
3
Slide upper Handle Post
into the body by aligning
the pin and sliding the Post
down into place.
6
Wrap power cord.