Bissell POWERFORCE 2089 Series User Manual page 14

Troubleshooting
WARNING
To reduce the risk of electric shock, turn power switch OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting checks.
Problem
Reduced
spray OR
no spray
Deep cleaner
not picking
up cleaning
solution
14
www.BISSELL.com
Possible causes
Clean Water Tank is empty
Lint screen on Clean Water Tank
cap clogged
Spray nozzle clogged
Upper handle is not in the upright
and locked position
Collection Tank is not aligned/
secured
Collection Tank is full
Removable nozzle installed
improperly
Removable nozzle full of debris
Red lint screen under Collection
Tank is clogged
Remedies
Refill tank with water and formula
Soak Clean Water Tank cap in warm
water and then rinse under running
water
Clean spray nozzle by rinsing
under water
Rotate the retractable handle lock,
pull handle up and return the handle
lock to the locked position
Check tank alignment and secure
with side latches
Empty tank
Unplug unit and align two "hooks"
into bottom first, then snap into place
on top
Unplug unit, remove nozzle and
rinse under running water
Remove debris from lint screen