Bosch Professional GOP 10,8 V-LI Operating Instructions Manual page 9

30 | en
To indicate the charge condition, press and hold
button 3 of the switched off machine.
LED
Continuous lighting 3 x green
Continuous lighting 2 x green
Continuous lighting 1 x green
Flashing light 1 x green
Changing the Tool
e
Before any work on the machine itself (e.g.
maintenance, tool change, etc.) as well as
during transport and storage, remove the
battery from the power tool. There is danger
of injury when unintentionally actuating the
On/Off switch.
e
Wear protective gloves when changing ap-
plication tools/accessories. Contact with
the application tool/accessoriy can lead to
injuries.
Selecting the Application Tool/Accessory
Accessory
HCS wood
segment saw
blade*
BIM segment
saw blade*
* Optional accessory; for the complete accessories
please see Bosch accessory programme.
F 000 622 274 | 12.2008
Book_Pag2ate35.indb 30
Capacity
≥ 2/3
≥ 1/3
<1/3
Reserve
Material
Wooden mate-
rials, plastic
Wooden mate-
rials, plastic,
non-ferrous
metals
* Optional accessory; for the complete accessories
please see Bosch accessory programme.
Mounting/Replacing the Application Tool/
Accessory
If required, remove an already mounted applica-
tion tool/accessory.
For removing the application tool/accessory,
loosen the screw 10 with the Allen key 11 and
remove the application tool/accessory.
Operating instructions
Accessory Material
HCS plunge Wooden mate-
cut saw rials, plastic,
blades, gypsum and
wood* other soft
materials
BIM plunge Metal (e.g.,
cut saw nails, screws,
blades, small pro-
metal* files), non-fer-
rous metals
BIM plunge Wood, metal,
cut saw non-ferrous
blade, wood metals
and metal*
HM-Riff seg- Grouting
ment saw joints, soft wall
blade* tiles, glass-fi-
bre reinforces
HM-Riff delta
plastic and
plate*
other abrasive
materials
Scraper, Carpets,
rigid* coverings
Scraper, Silicone and
flexible* other elastic
materials
Base plate Depends on
for sanding, sanding sheet
series Delta
93 mm*
Robert Bosch Ltda.
18.12.08 15:46:52