Table of Contents
Advertisement
Guide the pull-out rail with the rear retainer
1.
below behind the two guide rods for the required
shelf position and keep it horizontal.
Guide the rail lengthways to the rear to the guide
2.
rods, and slide both retainers onto each lower rod.
In doing so, use the rear retainer
tical rod.
16 Appliance door
To ensure that your appliance retains its appearance
and remains fully functioning for a long time, you can
detach the appliance door and clean it.
16.1 Detaching the appliance door
WARNING ‒ Risk of injury!
Components inside the appliance door may have sharp
edges.
Wear protective gloves.
▶
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
Keep your hands away from the hinges.
▶
Open the appliance door fully.
1.
from
to grip the ver-
Press and hold PUSH
3.
inwards
until the retainer
lower rod.
a
Release the PUSH tab.
4.
a The retainer clicks into place.
Pull the pull-out rail out as far as it will go and slide
5.
it back in.
Note:
Further information:
Appliance door en
and swing the pull-out rail
is attached in the
19
Advertisement
Table of Contents
