Docomo F-42A Quick Instruction Manual page 10

Table of Contents

Advertisement

◆ The terminal
・ Do not press the surface of the touch panel strongly or
operate it with sharp objects such as a nail, a
ballpoint pen and a pin.
- It may damage the touch panel.
・ Avoid extreme temperature.
- Use the terminal where the temperature ranges are
between 5 and 40℃ (limited to the temporary use in
a bathroom etc. when temperature is above 36℃)
and humidity ranges between 45 and 85%.
・ The terminal may affect land-line phones, TVs or
radios in use nearby, so use it as far as possible from
these appliances.
・ Maintain a separate record of the data you saved in
the terminal.
- If the data is deleted, DOCOMO assumes no
responsibility for the loss of any data.
・ Do not drop the terminal or subject it to shocks.
- May cause malfunction or damage.
・ Do not plug external devices into the stereo earphone
jack at a slant, or do not pull it forcibly while it is
plugged.
- May cause malfunction or damage.
・ It is normal for the terminal to become warm during
use or charging. Continue to use it.
・ Do not leave the terminal with the camera in areas
under strong direct sunlight.
- May cause discoloring or burn-in of elements.
・ Use the terminal with the slot cap closed.
- Dust and/or water brought into the terminal cause
troubles.
・ While microSD card is being used, do not take the card
out and do not turn off the terminal.
- May cause data loss or malfunction.
・ Do not bring magnetic cards etc. close to the terminal.
- Magnetic data in cash cards, credit cards, telephone
cards, floppy disks, etc. may be erased.
・ Do not bring magnetized objects close to the terminal.
- Bringing strong magnetism close may cause a
malfunction.
◆ Adapter
・ Charge the battery in an area within the proper
ambient temperature range (5-35℃).
・ Do not charge the battery in the areas below.
- In areas of excessive humidity, dust or vibrations
- Near land-line phones or TVs/radios
・ It is normal for the adapter to become hot while
charging. Continue to use it.
・ When using the DC adapter for charging, keep the
vehicle engine running.
- The vehicle's battery could become flat.
・ When using an outlet with a mechanism preventing
unplugging, follow the handling instructions for that
outlet.
・ Do not give strong shock. Do not deform the charging
jack.
- May cause malfunction.
◆ docomo nano UIM card
・ Do not use excessive force to install/remove docomo
nano UIM card.
・ Note that DOCOMO assumes no responsibility for
malfunctions occurring as the result of inserting and
using docomo nano UIM card with another IC card
reader/writer.
・ Always keep UIM ICs clean.
・ Clean UIM with a soft, dry cloth (such as a cloth for
eyeglasses).
・ Maintain a separate record of the data you saved in
docomo nano UIM card.
- If the data is deleted, DOCOMO assumes no
responsibility for the loss of any data.
・ To preserve the environment, bring the old docomo
nano UIM card to a sales outlet such as docomo Shop.
・ Take care not to scratch, touch accidentally or short
IC.
- May cause data loss or malfunction.
・ Do not drop docomo nano UIM card or subject it to
shocks.
- May cause malfunction.
・ Do not bend docomo nano UIM card or place heavy
objects on it.
- May cause malfunction.
・ Do not install docomo nano UIM card into the
terminal with a label or sticker put on.
- May cause malfunction.
8
Contents/Precautions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the F-42A and is the answer not in the manual?

Table of Contents