Disarming Operation - Pyle PWD250 System Manual

Vehicle security system optional remote start module and 2-way transmitter
Table of Contents

Advertisement

ARMING OPERATION
To arm the system press transmitter button 1:
• The siren will chirp once.
• The parking lights will flash once.*
• The doors will lock.*
• The LED will turn solid for 10 seconds
then start flashing slowly.
seconds the system is armed.
During Arming, if an open hood or trunk is
detected, the system will wait 10 seconds for
the zone to close. If a door is open the system
will wait up to 60 seconds for the zone to close
(depending on door zone setting during
installation). If a zone remains open after the
wait period, the siren will chirp, the parking
lights will flash 4 times to indicate the zone is
still open. The system will then ignore that
zone, but keep all other areas protected.
While Armed, the system will trigger if:
• The door, hood, or trunk is opened.
• The shock sensor detects an impact.
• An optional sensor is disturbed.
When triggered by the door or hood/trunk
input the siren will sound, the horn will honk,
and the parking lights will flash for 30 seconds.
If triggered by a sensor, the alarm cycle will last
15 seconds. If the alarm is triggered while the
optional remote start is engaged, the remote
start will immediately shut down.
If a zone triggers the system 3 times during a
single arming cycle, the system will bypass that
zone, keeping the other zones protected, until
the next time the system is armed.
If the shock sensor detects a light impact to the
vehicle or an optional sensor is disturbed, the
system will chirp and the parking lights will flash
5 times to warn away the potential intruder.
*
Optional Feature
PASSIVE ARMING OPERATION
The passive arming feature allows the
system to arm automatically without user
intervention.This feature can be toggled on/off
using the transmitter.
To turn passive arming on/off:
After 10
1. Press and hold button 2 for level shift.
2. Press button 4.
• The system will enter passive arming
operation mode.
• The optional 2-way LCD transmitter
display will show "LAST DOOR ARM".
To arm the system passively:
1. Turn the ignition key off.
2. Exit the vehicle and close all doors.
• The siren will chirp and parking lights
will flash once after closing the last door.
• The LED flashes rapidly indicating that
the system is preparing to arm. (The
system can be armed at any time by
pressing transmitter button 1.) NOTE:
Opening the hood/trunk or a door
resets the passive arming timer.
• After 30 seconds the siren will chirp to
indicate the system is armed. •
The doors will lock.†*
If Passive Locking was enabled during installation.

DISARMING OPERATION

To disarm the system press transmitter button 2.
• The siren will chirp twice.¥
• The parking lights will flash twice.¥
• The doors will unlock.*
• The dome light will turn on.*
¥
If the alarm was triggered while away, the system will respond
with 3 chirps and 4 parking light flashes.
*
Optional Feature.
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents