1. Manuals
  2. Brands
  3. Multi-Mover Manuals
  4. Industrial Equipment
  5. 3XL 40TO
  6. User manual and parts list

Multi-Mover 3XL 40TO User Manual And Parts List

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Tighten all wheel bolts to 120nm after the first 2 hours of driving.
Transport
* Only use stable loading surfaces with sufficient loading capacity (see section 2.2).
* Secure the MULTI-MOVER 3XL 40TO against tilting or sliding.
* It is prohibited to;
-
get under the MULTI-MOVER 3XL 40TO while lifting
-
remain within the tilting range of the MULTI-MOVER 3XL 40TO during unloading
MULTI-MOVER 3XL 40TO
USER MANUAL and PARTS LIST
MULTI-MOVER 3XL 40TO
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 3XL 40TO and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Multi-Mover 3XL 40TO

Summary of Contents for Multi-Mover 3XL 40TO

  • Page 1 * Only use stable loading surfaces with sufficient loading capacity (see section 2.2). * Secure the MULTI-MOVER 3XL 40TO against tilting or sliding. * It is prohibited to; get under the MULTI-MOVER 3XL 40TO while lifting remain within the tilting range of the MULTI-MOVER 3XL 40TO during unloading MULTI-MOVER 3XL 40TO...

  • Page 2: Table Of Contents

    Chapter 9 PARTS Chapter 10 DECLARATION OF CONFORMITY Appendix Electrical circuit diagram Appendix User manual battery charger Appendix Part List Ex View Multi-Mover Europe B.V. www.multi-mover.eu T +31 24 744 00 70 F +31 24 890 17 90 MULTI-MOVER 3XL 40TO...

  • Page 3: Introduction / Warranty / Definitions / Safety Symbols

    The user manual should be made available to the user of the Multi-Mover 3XL 40TO and must be present at the Multi-Mover 3XL 40TO when it is being used. The user manual must have been read by anyone working with/at the Multi-Mover XXL 10 TO, and the instructions must be observed.

  • Page 4: Chapter 2 Technical Description

    Optional Safety symbols On various places on the Multi-Mover 3XL 40TO you will find standardised safety symbol stickers as displayed to the right. The upper part warns against a general or particular hazard. The lower part indicates what type of hazard is being warned against and will explain what you must do.

  • Page 5: Packaging, Loading / Unloading, Towing, Recycling

    Loading and unloading If the Multi-Mover 3XL 40TO has to be moved by means of a lift truck, the lift forks must be placed at the heaviest part at the rear of the Multi-Mover 3XL 40TO, between the 2 large wheels.

  • Page 6: Chapter 3 Safety Regulations

    Never drive onto a slope at an angle or crosswise. Only ever drive on and off a slope at a right angle. The Multi-Mover 3XL 40TO with trailer(s) may also tip over if the bends are taken at a speed that is too high.
  • Page 7 3.10 Caution! Hazard of serious injury due to overloading the Multi-Mover 3XL 40TO. The load behind the Multi-Mover 3XL 40TO may not be more than indicated at section 2.2 tech- nical data. Make sure the trailer(s) has/have been loaded evenly and safely.
  • Page 8 The MULTI-MOVER 3XL 40TO may only be operated after the operator has thoroughly studied the user manual and after the owner of the Multi-Mover 3XL 40TO has provided a full training / instruc- tion concerning the operation and the safety regulations.

  • Page 9: Chapter 4 Preparation

    If you want to move the substances mentioned above we offer an ATEX Casing The Multi-Mover 3XL 40TO does not have permission to be driven on public roads without safety op- tions. It is not a vehicle according to the Law.

  • Page 10: Operator

    Inspection prior to putting into operation In addition to good maintenance, the operator of the Multi-Mover 3XL 40TO must pay attention to the following aspects after each work period.

  • Page 11: Chapter 5 Use

    Only ever drive on and off a slope at a right angle. The Multi-Mover 3XL 40TO may also tip over if the bends are taken at a speed that is too high. Maximum slope angle, with / without load 4% / 20 % Passengers may not be taken along with the Multi-Mover 3XL 40TO and towed vehicle.
  • Page 12 Avoid bends if necessary and be careful on small hills, thresholds, etc. Reduce speed in case of sharp bends. The Multi-Mover 3XL 40TO may only be driven at speeds that allow you to stop in time, e.g. if an ob- stacle is standing in or entering the driving area.

  • Page 13: Operation

    3 Fuse Box 4 Control box unit 1 motor 5 Control box unit 2 power steering 6 Steering handle (Tiller head) Power steering gear unit 8 Set box 9 Batteries 8x 10 Motor with reduction gear unit MULTI-MOVER 3XL 40TO...
  • Page 14 15 Main Fuse Plate with serial number Grip Drive switch forwards/backwards Belly Button/Emergency brake 10 Lock on/off Steering handles The steering handle (1.6) with bar is a fixed part of the Multi-Mover 3XL 40TO, moving to the left MULTI-MOVER 3XL 40TO...
  • Page 15 By rotating the drive switch (2.8) to the front with your thumb, the driving direction will first be switched on and then, when rotated further, the Multi-Mover 3XL 40TO will start to drive. The cen- tral position is the neutral position.

  • Page 16: Batteries

    For a longer life span, it is better not to allow the battery to get completely empty. It is also not good to continue charging a battery that is almost full. If the Multi-Mover 3XL 40TO is out of operation (for a longer period), we recommend keeping the battery charger connected, it will automatically keep the battery in a charged condition.
  • Page 17 Frequent use If the Multi-Mover 3XL 40TO is used more than 8 hours a day, the batteries will also wear more quickly. When selecting batteries, it is important to take into account the Multi-Mover XXL's fre- quency of use.

  • Page 18: Coupling Trailer(S)

    5.5 Coupling trailer(s) The Multi-Mover 3XL 40TO is made with a standard tow hitch with tow pin or a ball coupling point in the middle of the Multi-Mover 3XL 40TO, to which the pole of a trailer can be coupled.
  • Page 19 Switch off the remote control (6) Steering to the left/right. Optional Hydraulic hitch Emergency stop button. Horn. Driving forward/backward. On/Off switch. To drive, first press the horn 2 x (4) first , then move 5, 2 times to start driving. MULTI-MOVER 3XL 40TO...

  • Page 20: Chapter 6 Maintenance

    MAINTENANCE When performing maintenance, you should always observe the safety regulations, (chapter 3). During maintenance, always switch off the Multi-Mover 3XL 40TO and remove the ignition key from the ignition lock In case of doubt, consult the user manual. 6.1 Inspection The operator should perform the following inspections regularly, without trailer;...

  • Page 21: 6.3 Cleaning

    Taking out of operation If the Multi-Mover 3XL 40TO is not used for a certain period, you will have to; connect the battery charger place the Multi-Mover 3XL 40TO on blocks, so that the tyres do not touch the ground Have maintenance and repairs performed by persons authorized by Multi-Mover Europe BV.
  • Page 22 Separate all materials that full under the category of chemical waste, such as oil, lubricants, switching material, batteries and certain electric components. Dispose them as chemical waste. Offer residual materials to recognized waste processing companies who have the required permits. MULTI-MOVER 3XL 40TO...

  • Page 23: Chapter 8 Failures

    FAILURES When removing a failure, ALWAYS switch off the Multi-Mover 3XL 40TO and remove the ignition key. If a defect is established at the Multi-Mover 3XL 40TO, do not use it until the repair has been completed. Failure Solution The Multi-Mover 3XL 40TO does not drive.

  • Page 24: Chapter 10 Declaration Of Conformity

    We, Multi-Mover Europe BV, Boomsestraat 38, 6613 AH Balgoij, Netherlands declare at our own full responsibility, that the Multi-Mover ***, with serial number 2020 *** to which this declaration applies, is in conformity with the provisions of the following directive(s):...

Table of Contents