Turbo Timer Mode - Pyle PWD301 System Manual

TURBO TIMER MODE

For vehicles equipped with a turbo-charged
engine, the optional turbo timer feature may be
programmed to run the engine at idle for an
additional period of time after the ignition is
turned off. The run-time may be programmed
for a 1, 3, or 6 minute cycle, allowing the turbo
proper time to cool down, extending its life.
STATUS INDICATOR (LED) FUNCTIONS
On Solid = Valet Mode
Slow Flash = System Locked
Rapid Flash w/ Ignition on = Open Hood Warning
Double Flash = Auto Cold Start Mode Activated
TRANSMITTER FUNCTION QUICK REFERENCE
TRANSMITTER OPERATION CHART
Operation
Lock
Unlock
Remote Valet
Remote Start
Auxiliary 1
Stop N Go
Car Locator
Auto Cold Start
* Must press button two times very quickly
** Brake pedal must be pressed while performing button sequence
Level Shift: Pressing and holding a transmitter button for more than one second enters the Level
Shift mode for two seconds. The 1-way transmitter's LED turns Green to indicate level shift,
while the optional 2-way transmitter plays a chime to indicate level shift. While in level shift
mode, pressing a transmitter button accesses the system's special features such as Valet,Auxiliary,
etc. After two seconds, the transmitter will automatically exit level shift mode if no other
transmitter button has been pressed.
LED AND PARKING LIGHT INDICATIONS
System Status
Locked
Unlocked
Unlocked
Either
Either
Unlocked
Either
Unlocked
To activate the Turbo Timer feature:
1. Make sure the engine is running.
2. Press button 2.
3. Turn ignition off.
• The engine will continue to run for 1, 3,
or 6 minutes.
4. Exit the vehicle.
PARKING LIGHT FUNCTIONS
On Solid = Vehicle Remote Starting
Flash I x = System Locked
Flash 2x = System Unlocked
Ignition 1st Button
Off Button 1
Off Button 2
Off Button 1 Level Shift
Off Button 2 Level Shift
Off Button 3 Level Shift
On Button 2 Level Shift
Off Button 3
On Button 2 Level Shift
4
2nd Button
Button 1
Button 2
Button 3
Button 2
*
Button 3
**
Button 2