Testing System - Pyle PWD203 User Manual

Programmable Features
Step Function
1. Arming Mode
2. Parking Light Output
3. Auto Rearm
4. Arming Chirps
5. Trunk Disarm
6. Ignition Locking
7. Ignition Unlocking
8. Door Unlock Pulse
9. Passive Locking
10. Open Door Report
11. Siren / Horn Chirps
12. Auxiliary 1 Output
13. Auxiliary 2 Output
14. Auxiliary 3 Output
15. Auto Activate Aux 2
16. Entry Delay w/Passive Off
17. Horn Honk Output
18. Car Jack Mode
Active. Pressing transmitter button 4 with the
ignition on will manually activate the Anti-
Carjacking feature.
Passive. When selected, the Anti-Carjacking
feature will activate whenever a door is opened
while the ignition is on.
Full-time. When selected, the Anti-Carjacking
feature will automatically activate each time the
ignition is turned on.
Adjusting Sensors
The sensor test mode allows quick and easy
sensor tuning.
To adjust the sensor(s):
1. Turn on the ignition.
2. Press Transmitter Button 5 then button 4.
3. Test the sensors.
• The siren chirps to indicate the zone.
Button 1 (default) Button 2
Active Passive
Flash twice 30 seconds
Off Auto rearm
Normal Silent
Off On
On Off
All doors Driver only
1 sec L/1 sec UL 3 sec L/3 sec UL
Off On
10 seconds 60 seconds
Siren only Horn chirps
Momentary Timed
Momentary Timed
Momentary Timed
Off On Arming
On
Flashing Continuous
Off Active
Button 3
Passive w/countdown
Auto rearm w/lock
Off
1 sec L/1 sec UL x2 30 sec L/1 sec UL
Horn chirps w/warn
Latched
Latched
Latched
On Disarming
Passive
Short chirp = warn (shock or optional)
Long chirp = Shock Trigger
2 long chirps = Optional Trigger
4. Turn off the ignition.

Testing System

Arm and disarm system, checking that the siren
chirps and parking lights are functioning
normally. Make sure that the programmed
features are performing correctly, ie.: ignition
locks, passive arming, passive locks, etc. Test the
doors and hood/trunk inputs (make sure all
doors trigger the system, not just the drivers
door). Arm the system and try starting the
vehicle, it should not start. Disarm the system
using the emergency override. Check the range
of the remote transmitters. Make sure the
customer has physical knowledge of the
location of the valet/override switch.
9
Button 4
Ignition latched
Full-time