Miller Millermatic 210 Owner's Manual page 19

2-11. Positioning Jumper Links
3
1
2-12. Electrical Service Guide
Input Voltage
Input Amperes At Rated Output
Max Recommended Standard Fuse Or Circuit Breaker Rating In Amperes
Min Input Conductor Size In AWG/Kcmil
Max Recommended Input Conductor Length In Feet (Meters)
Min Grounding Conductor Size In AWG/Kcmil
Reference: 1999 National Electrical Code (NEC)
1 Choose a circuit breaker with time-current curves comparable to a Time Delay Fuse.
2 "Time-Delay" fuses are UL class "RK5" .
3 "Normal Operating" (general purpose – no intentional delay) fuses are UL class "K5" (up to and including 60 amp), and UL class "H" ( 65 amp and
above).
200 VOLTS
230 VOLTS
S-153 980
2
Circuit Breaker
1 2
, Time-Delay
3
Normal Operating
Check input voltage available at
site and listed on the machine rating
label.
1 Jumper Links Access Door
Open door.
2 Jumper Link Label
Check label – only one is on unit.
3 Input Voltage Jumper Links
Move jumper links to match input
voltage.
Close and secure access door.
Tools Needed:
3/8 in
Ref. 802 476-C
200 230
32 28
35 30
45 40
10 10
89 118
(27) (36)
10 10
OM-1325 Page 15