Technics OTTAVA S Operating Instructions Manual page 61

Operate via App
The key operation of this unit is disabled.
• Make sure to operate from the dedicated
application "Technics Audio Center" (free of
charge) when you stream music files from the
device on your network or online music services
etc.
For details, visit:
www.technics.com/support/
Unlocked
• "OPT" is selected, but no device is connected.
Check the connection with the device. (⇒ 33)
• The sampling frequency components, etc. of the
audio signals are not input correctly.
 For supported formats, refer to "File format"
(⇒ 70)
USB Over Current Error
• USB device is drawing too much power.
Disconnect the USB device and turn the unit to
standby and on again. (⇒ 36)
Wired LAN
The LAN cable is connected to this unit.
• Disconnect the LAN cable when setting the
wireless LAN connection. (⇒ 24)
Wi-Fi Setup
• Wireless LAN (Wi-Fi) setting may start when this
unit is turned on. If you stop the Wi-Fi setting,
press [ ]. To keep the Wi-Fi setting, start the
"Google Home" app and follow the on-screen
instructions. (⇒ 22, 24)
61