Using Digital Audio Output Device - Technics OTTAVA S Operating Instructions Manual

Operations
Using digital audio output
device
You can connect a CD player, etc. with
optical digital audio cable (not supplied) and
play back music.
1 Disconnect the AC mains lead.
2 Connect this unit and a CD player etc.
3 Connect the AC mains lead to this unit.
(⇒ 21)
4 Press [
5 Press [
6 Start playback on the connected device.
Note
• When enjoying video contents with this
function, the video and audio output may not be
synchronised.
• Pressing [
(To cancel the muting, adjust the volume, press
again or turn the unit to standby.)
• The digital audio input terminal of this unit can
only detect the following linear PCM signals. For
details, refer to the operating instructions of the
connected device.
 Sampling frequency:
32/44.1/48/88.2/96 kHz
 Number of quantisation bits:
16/24 bit
10BASE - T/
100BASE - TX
DIMMER
INFO 5V 500mA L AN
CD player, etc.
] to turn this unit on.
] repeatedly to select "OPT".
] mutes the sound while playing back.
AC IN
OPT IN AUX IN
Optical digital
audio cable
(not supplied)
33