Installation; Notes On The Speakers; For Optimum Sound Effects - Technics OTTAVA S Operating Instructions Manual

Read first

Installation

Installation
• Turn off all the equipment before connection and
read the appropriate operating instructions. Be
sure to raise this unit when moving, and do not
drag this unit.

Notes on the speakers

• These speakers do not have magnetic shielding.
Do not place them near TV, PC or other equipment
easily influenced by magnetism.
• Playing music at high volumes for a long period
can cause damage to the system and shorten the
life of the system.
• Decrease the volume in the following conditions to
prevent damage.
 When playing distorted sound
 When adjusting the sound quality
 When turning on/off this unit

For optimum sound effects

The quality and volume of the bass sound, sound
localisation performance, sound ambience, etc. will
change depending on the installation location of
this unit, listening position, room conditions, and
other factors. Refer to the information below when
installing this unit.
Determining the installation location
• Place this unit on a flat safe surface.
Adjusting the distances between this unit and
the wall
• If you install this unit close to a wall or a corner,
the bass sound will be more powerful, however,
if the unit is too close to it, sound localisation
performance and sound ambience may
deteriorate.
12
(Continued)