Table of Contents
Advertisement
8
Press i/MENU.
The timer program list sorted by the start time appears.
9
If you want to set another program, repeat
steps 3 through 8.
10
Press i/MENU.
PROGRAM COMPLETED
PLEASE PUSH POWER FOR
TIMER RECORDING START
The normal screen returns after a few seconds.
11
Press l /6 to turn off the VCR.
• "TIMER" appears on the display window, and the VCR
stands by for the timer recording.
• The cassette is ejected and the guide message
appears if the cassette's erasure prevention tab has
been removed. The cassette-in indicator flashes on the
display window.
• If a cassette is not inserted, the guide message
appears and the cassette-in indicator flashes.
To set the daily/weekly timer
In step 5, press OK before entering the date. Then press j
or l to select the recording type.
DLY: For daily recording from Monday to Friday
SU indication to SA indication: For a weekly recording
PR
DATE
PR-01
1 7
1 7
– – : – – ~ – – : – – SP
– –
– –
– – : – – ~ – – : – – SP
– –
– –
– – : – – ~ – – : – – SP
– –
– –
– – : – – ~ – – : – – SP
– –
– –
– – : – – ~ – – : – – SP
– –
– –
– – : – – ~ – – : – – SP
– –
– –
– – : – – ~ – – : – – SP
DLY SU MO TU WE TH FR SA
Press OK.
To cancel the daily/weekly timer setting, press OK to turn off
the daily/weekly display. Press j to highlight the date, then
press i+ or k- to correct the date.
To correct the data while setting the timer
Before pressing i/MENU in step 8, press j or l until the
item you want to correct is highlighted, then set the correct
data using the number buttons, i+ or k-.
To cancel a program
Press i/MENU and select REC by pressing j or l, then
press OK. Press i+ or k- to select an unnecessary
program, then press j to cancel.
T I M E
If the program overlaps another
Do not overlap programs, since overlapping portions of the
conflicting programs will not be recorded. Earlier recording
times have priority over later recording times as shown in
the diagram.
8:00
9:00
→
Program 1
→
Program 2
→
Program 3
Non-recorded portion
Actual recorded
→
portions
Prog. 1
Tips
• If the timer program list and "PROGRAM FULL" appear on
the TV screen in step 2, 7 programs are already set. Cancel
an unnecessary program.
• When the power supply is interrupted for more than 3
seconds, the preset program and the clock are cleared. In
this case, set the clock and the program again and turn the
VCR off so as to stand by for timer recording.
• If you want to record a program through the line input, press
i+, k- or INPUT SELECT to display "AV1" (from the
EURO AV1 AUDIO/VIDEO jack on the rear) or "AV2" (from
the EURO AV2 DECODER jack on the rear) in step 4
instead of the TV station.
• To confirm the setting, select REC in the menu to display the
timer program list. Press i/MENU to return to the normal
screen.
Notes
• If you make an irregular setting, "PLEASE CHECK" appears.
• During timer recording, when the tape reaches the end, VCR
turns off and "TIMER" flashes on the display window.
10:00
11:00
Prog. 2
Prog. 3
21
ENGLISH
Advertisement
Table of Contents
