Table of Contents
Advertisement
PLAYBACK
Playing back a tape
C PLAY
CH/TRACKING
k-
Before starting
Turn on the TV and set the TV for VCR reception.
• When the VCR and TV are connected with a 21-pin scart
cord, set the TV to the AV mode.
• When they are connected with only the antenna cord, set
the TV to the video output channel.
1
Insert a cassette.
The power turns on automatically.
Playback starts immediately if the erasure prevention tab
has been removed from the cassette.
2
Press C PLAY to start playback.
To stop playback
Press s STOP.
Tip
When you can not see the playback picture on the screen,
press TV/VIDEO to display "VCR" on the display window.
Notes
• When the tape reaches the end during playback, fast-
forward, forward search, skip search or CM skip, the VCR
automatically rewinds the tape to the beginning, ejects the
cassette, and turns the power off. (Automatic rewind
function)
• The VCR selects the tape speed, SP, LP or EP (NTSC only)
automatically.
• Do not put your hands into the tape compartment. Injury may
result. Be especially careful that young children do not do so.
12
ENGLISH
If you cannot get a clear playback
picture
Although the VCR adjusts the tracking automatically, you
TV/VIDEO
may need to adjust the tracking manually if the tape quality
AUTO
is too poor.
TRACKING
While the VCR is adjusting the tracking automatically,
"A-tr" flashes on the display window. It goes off after the
adjustment is complete.
s STOP
CH/TRACKING
i+
If the picture and the sound have noise, try manual tracking.
To adjust the tracking manually
During playback, press CH/TRACKING i+ or k-
repeatedly until you get the best possible picture.
(Automatic Tracking is canceled.)
To return to the automatic tracking
Press AUTO TRACKING.
Note
"A-tr" does not appear while playing back unrecorded portions
of the tape.
Hi-Fi
REC
TIMER VCR
M
REM BILSAP
ST
SP LP EP
Advertisement
Table of Contents
