Various Search Functions - Sony HV-FX5950D Operating Instructions Manual

Various search functions

ZERO RETURN
OK/CLOCK/
COUNTER
j
CH/TRACKING
k-
Playing at various speeds
During playback
Press j or l repeatedly during playback. Each press
varies the playback speed gradually as follows:
Press The VCR switches
l once forward playback at twice speed
l twice forward search
j once or forward slow motion playback
SLOW T
j twice still
j 3 times reverse playback
j 4 times reverse playback at 3 times speed
j 5 times reverse search
During still
Press j or l repeatedly during still. Each press varies the
playback speed gradually as follows:
Press The VCR switches
l once or forward slow motion playback
SLOW T
l twice forward playback
l 3 times forward playback at twice speed
l 4 times forward search
j once or reverse playback
j twice reverse playback at 3 times speed
j 3 times reverse search
Tips
• You can adjust unstable pictures during still by pressing CH/
TRACKING i+ or k- repeatedly.
• Depending on the tape, noise lines may appear or color may
fade during still, and forward and reverse searches.
You can move the noise lines during forward and reverse
searches by pressing CH/TRACKING i+ or k-
repeatedly.
• If noise lines appear on the still picture, press l to play back
at slow speed. Press CH/TRACKING i+ or k- to move
the noise lines, then j to return to the still picture.
Notes
• If slow motion playback lasts for more than 30 seconds, the
VCR will automatically enter playback mode to protect the
tape.
• Reverse slow motion playback can not be made.
Rewinding or fast-forwarding to a
specific point – Zero Return
Before starting
Make sure the on-screen display is set to ON (page 24).
1
s STOP
CLEAR
CH/TRACKING i+
l
SLOW T
2
3
Notes
• When you insert a cassette, the tape counter is reset to
• The tape counter does not work while playing unrecorded
Press OK/CLOCK/COUNTER until the tape
counter appears on the TV screen. See page
24.
Press CLEAR at the point you want to locate
later.
The tape counter on the TV screen resets to "0:00:00".
After playback or recording, press s STOP,
then ZERO RETURN.
The tape automatically stops when the tape counter
returns to "0:00:00".
"0:00:00".
portions of a tape.
S E
0 : 3 0 : 0 0
S E
0 : 0 0 : 0 0
CONTINUE
15
ENGLISH