Table of Contents
Advertisement
Menus and submenus
206
Press the : or 9 button to select the
X
Display Unit Speed-/Odometer
You will see the selected setting:
Press the a button to save the setting.
X
The selected unit of measurement for distance
applies to:
the digital speedometer in the
R
the odometer and trip odometer
R
the trip computer
R
the current consumption and the range
R
the navigation instructions in the
R
cruise control
R
DISTRONIC PLUS
R
ASSYST PLUS service interval display
R
Selecting permanent display
The
Permanent Display:
to choose whether the multifunction display
always shows the outside temperature or the
speed.
The speed display is inverse to the speedome-
ter.
Press the = or ; button on the steering
X
wheel to select the
Press the : or 9 button to select the
X
Instrument Cluster
Press a to confirm.
X
Press the : or 9 button to select the
X
Permanent Display:
The current setting,
or
Speedometer [km/h]/Speedometer
[mph], appears.
Press the a button to save the setting.
X
Lights
Setting the brightness of the instrument
cluster lighting and switches
The lighting in the instrument cluster, in the dis-
plays and the controls in the vehicle interior can
be adjusted with the
Switches:
function.
Press the = or ; button on the steering
X
wheel to select the
Press the : or 9 button to select the
X
Lights
submenu.
Press a to confirm.
X
function.
km
or miles.
Trip
menu
Navi
menu
function allows you
Sett.
menu.
submenu.
function.
Outside Temperature
Brightness Display/
Sett.
menu.
Press the : or 9 button to select the
X
Brightness Display/Switches:
The current setting appears.
Press a to confirm.
X
Press the : or 9 button to adjust the
X
brightness to any level from
Level 5
(bright).
Press the a or % button to save the
X
setting.
If the light switch is set to the Ã, T or
L position, the brightness is dependent
upon the brightness of the ambient light.
i
The light sensor in the instrument cluster
automatically controls the brightness of the
multifunction display.
In daylight, the displays in the instrument
cluster are not illuminated.
Switching the daytime running lamps on/
off
Press the = or ; button on the steering
X
wheel to select the
Press the : or 9 button to select the
X
Lights
submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Day. Run. Lights
If the
Day. Run. Lights
switched on, the multifunction display shows
the cone of light and the W symbol in
orange.
Press the a button to save the setting.
X
Further information on daytime running lamps
(
page 107).
Y
Setting the brightness of the ambient
lighting
Press the = or ; button on the steering
X
wheel to select the
Press the : or 9 button to select the
X
Lights
submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Ambient Brightness
The current setting appears.
Press a to confirm.
X
function.
Level 1
to
Sett.
menu.
function.
function has been
Sett.
menu.
function.
Advertisement
Table of Contents
