Table of Contents
Advertisement
Further information about DISTRONIC PLUS
with Steering Assist and Stop&Go Pilot
(
page 162).
Y
Activating/deactivating ATTENTION
ASSIST
Press the = or ; button on the steering
X
wheel to select the
DriveAssist
Press the 9 or : button to select
X
Attention
Assist.
Press a to confirm your selection.
X
The current selection appears.
Press a to confirm.
X
Press the : or 9 button to set Off,
X
Standard
or Sensitive.
Press the a button to save the setting.
X
When ATTENTION ASSIST is deactivated, the
é symbol appears in the multifunction dis-
play in the assistance graphics display.
For further information about ATTENTION
ASSIST, see (
page 184).
Y
Activating/deactivating Blind Spot
Assist
Press the = or ; button on the steering
X
wheel to select the
DriveAssist
Press the 9 or : button to select
X
Blind Spot
Assist.
Press the a button.
X
The current selection appears.
To activate/deactivate: press the a but-
X
ton again.
For further information about Blind Spot Assist,
see (
page 187).
Y
For further information about Active Blind Spot
Assist, see (
page 190).
Y
Activating/deactivating Lane Keeping
Assist
Press the = or ; button on the steering
X
wheel to select the
DriveAssist
Press the 9 or : button to select
X
Lane Keep.
Assist.
Press the a button.
X
The current selection appears.
Press a to confirm.
X
Press the : or 9 button to set Off,
X
Standard
Press the a button to save the setting.
X
For further information about Lane Keeping
Assist, see (
For further information about Active Lane Keep-
ing Assist, see (
menu.
Service menu
Depending on the equipment installed in the
vehicle, you have the following options in the
Serv.
menu:
Calling up display messages in message
R
memory (
Restarting the tire pressure loss warning sys-
R
tem (
Y
Checking the tire pressure electronically
R
(
page 308)
Y
Calling up the service due date
R
(
page 278)
Y
Settings menu
Introduction
menu.
Depending on the equipment installed in the
vehicle, you have the following options in the
Sett.
menu:
Changing the instrument cluster settings
R
(
page 205)
Y
Changing the light settings (
R
Changing the vehicle settings (
R
Changing the convenience settings
R
(
page 208)
Y
Restoring the factory settings (
R
Instrument cluster
Selecting the distance unit
The
Display Unit Speed-/Odometer:
menu.
tion allows you to choose whether certain dis-
plays appear in kilometers or miles in the mul-
tifunction display.
Press the = or ; button on the steering
X
wheel to select the
Press the : or 9 button to select the
X
Instrument Cluster
Press a to confirm.
X
Menus and submenus
or Adaptive.
page 189).
Y
page 193).
Y
page 212)
Y
page 308)
Y
Sett.
menu.
submenu.
205
page 206)
page 207)
Y
page 209)
Y
func-
Z
Advertisement
Table of Contents
