Table of Contents
Advertisement
Driving systems
160
You can set the specified minimum distance for
DISTRONIC PLUS by varying the time span
between one and two seconds. With this func-
tion, you can set the minimum distance that
DISTRONIC PLUS keeps to the vehicle in front,
dependent on vehicle speed. You can see this
distance in the multifunction display
page 160).
(
Y
To increase: turn control ; in direction =.
X
DISTRONIC PLUS then maintains a greater
distance between your vehicle and the vehicle
in front.
To decrease: turn control ; in direction :.
X
DISTRONIC PLUS then maintains a shorter
distance between your vehicle and the vehicle
in front.
DISTRONIC PLUS displays in the speed-
ometer
When DISTRONIC PLUS is activated, one or two
segments ; in the set speed range light up.
If DISTRONIC PLUS detects a vehicle in front,
segments ; between speed of the vehicle in
front : and stored speed = light up.
i
For design reasons, the speed displayed in
the speedometer may differ slightly from the
speed set for DISTRONIC PLUS.
DISTRONIC PLUS displays in the multi-
function display
General notes
In the Assistance menu (
board computer, you can select the assistance
display.
Display when DISTRONIC PLUS is deacti-
vated
Vehicle in front, if detected
:
Distance indicator, current distance to the
;
vehicle in front
Specified minimum distance to the vehicle
=
in front; adjustable
?
Own vehicle
Select the
Assist. Graphic
X
the on-board computer (
Display when DISTRONIC PLUS is activa-
ted
Vehicle in front, if detected
:
;
Specified minimum distance to the vehicle
in front; adjustable
Own vehicle
=
?
DISTRONIC PLUS active (text only appears
when the cruise control lever is actuated)
Select the
Assist. Graphic
X
the on-board computer (
i
You will see the stored speed for about five
seconds when you activate DISTRONIC PLUS.
page 203) of the on-
Y
function using
page 203).
Y
function using
page 203).
Y
Advertisement
Table of Contents
