Using And Maintaining The Electric Engine; Controller Maintenance - wayscral EVERYWAY E-200 N Manual

•
•
•
•

5. Using and maintaining the electric engine

Our power-assisted bicycles are programmed to start the power
assistance after two turns of the chain set.
Do not use the bicycle in flooded areas or during thunderstorms. Do
not immerse electrical components in water to avoid damage.
Avoid knocks to the engine to prevent damaging it.

6. Controller maintenance

It is very important to take good care of the controller according to the
following instructions:
•
Protect the controller against water infiltration and immersion.
Note: If you suspect that water has seeped into the case, turn off the
battery immediately and continue without power assistance. You can
restart it as soon as the controller is dry.
•
Do not shake, knock, or drop the controller.
WARNING: do not open the controller casing. Any attempt
to open, modify or adjust the controller casing will void the
warranty. Please ask your retailer or a qualified
professional to carry out repairs.
Any changes to the electric management system settings,
including changing the speed limit, are strictly prohibited
and will void the warranty of your bicycle.
Never place the battery near a fireplace or other
heat source.
Do not shake, knock, or drop the battery.
When the battery pack is removed from the bicycle,
keep it out of the reach of children to prevent
accidents.
You must not open the battery.
86
EN