Pedalling Assistance And Battery; Pedalling Assistance - wayscral EVERYWAY E-200 N Manual

C. Pedalling assistance and battery
Once your bike is set up, press the "ON/OFF" button located on
the rear, right-hand edge of the battery, then step on it and start
pedalling. After two turns of the chain set, the power-assisted engine
will start and provide you with additional driving force. A slight humming
can be heard, indicating that the engine is on. This power-assisted
bicycle provides motorised assistance up to a speed of 25 km/h.
Beyond that, the engine will stop. You can go faster, but you will have
to do it on your own, without any power assistance.
The engine located in the rear hub will not function until you have
completed two full turns of the chain set. This is an important safety
feature. This feature protects the engine and its controller, and extends
the life of electrical components.
I.

Pedalling assistance

To start the bike, press the main "ON/OFF" switch located at the rear
left of the battery (20).
The rest of the settings and information are accessed directly on the
display located on the handlebars.
RECOMMENDATION: turn off the main switch on the
battery when you are no longer in the seat. This saves the
battery charge.
74
EN