Table of Contents
Advertisement
2.6.4
Installing a PIKE II card
Unplug the power cord before installing or removing an expansion card. Failure to do so
may cause severe damage to the motherboard and other system components!
1.
Remove the GPU bar and air duct from the chassis, please refer to section Air Duct for
more details.
2.
Loosen the heatsink screws in the order shown, then lift and remove the CPU and
heatsink.
The heatsink screws are T30 models. A torque value of 12 inch-lbf is recommended.
2-24
Chapter 2: Hardware Setup
Advertisement
Table of Contents
