Changing The Oven Light; Cleaning The Exterior - LG SIGNATURE LUTE4619SN Owner's Manual

44 MAINTENANCE

Changing the Oven Light

The oven light is a standard 40-watt appliance bulb. It
turns on when the oven door is open. When the oven
door is closed, touch Start to turn it on or off.
1
Unplug the range or disconnect power and make
sure that the oven and bulb are cool first.
2
Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
3
Turn the bulb counterclockwise to remove it from
the socket.
4
Insert the new bulb and turn it clockwise.
5
Insert the glass bulb cover and turn it clockwise.
6
Plug in the range or reconnect the power.
WARNING
• Make sure that the oven and bulb are cool.
• Disconnect the electrical power to the range at
the main fuse or circuit breaker panel. Failure
to do so can result in severe personal injury,
death, or electrical shock.

Cleaning the Exterior

Painted and Decorative Trim
For general cleaning, use a cloth with hot soapy
water. For more difficult soils and built-up grease,
apply a liquid detergent directly onto the soil. Leave it
on for 30 to 60 minutes. Rinse with a damp cloth and
dry. Do not use abrasive cleaners.
Stainless Steel Surfaces
To avoid scratches, do not use steel wool pads.
1
Place a small amount of stainless steel
appliance cleaner or polish on a damp cloth or
paper towel.
2
Clean a small area, rubbing with the grain of the
stainless steel if applicable.
3
Dry and buff with a clean, dry paper towel or soft
cloth.
4
Repeat as necessary.
NOTE
• Do not use a steel wool pad. it will scratch the
surface.
• To clean the stainless steel surface, use warm
sudsy water or a stainless steel cleaner or
polish.
• Always wipe in the direction of the metal
surface finish.
• Stainless steel appliance cleaner or polish can
be purchased online or from most retailers of
appliances or home goods.