EGO SNT2100-FC Operator's Manual page 18

3. Align the grooves in the battery
pack with the raised ribs in one
of the battery compartments, and
then insert the battery pack into the
compartment (Fig. 11).
4. Push the battery pack until you hear
a "click". The battery-release button
will spring up when the battery pack
is securely attached.
5. Attach the other battery pack into
the other battery compartment in
the same way.
6. To detach the battery pack, depress
the battery-release button to release
the battery pack, and then lift it out
of the compartment (Fig. 12).
7. Close the battery cover.
NOTICE:
Make sure that the latch on
the snow blower snaps into place and that the battery pack(s) are secured to the unit
before starting operation.
STARTING/STOPPING THE SNOW BLOWER
CAUTION:
switch.
WARNING:
thrown into your or others' eyes, which can damage eyes severely. Always wear safety
glasses while operating the snow blower or while performing any adjustments or repairs
on the snow blower.
WARNING:
the snow blower when it is in use.
18
56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2100/SNT2100-FC
Do not attempt to override the operation of the safety button and bail
The operation of a snow blower can result in foreign objects being
Ensure that other people and pets remain at least 100' (30m) away from
Battery Cover
11
Battery
Compartment
12
Install Battery
Battery-
Release
Button
Remove Battery
2
1