Table of Contents
Advertisement
Function Instructions
contents of USB.
1.During USB playback mode, press
press
button for selection of last track. Press 2RPT on panel or
press
7RPT on remote control over 2 seconds to select the content of
USB for repeat playback function. Press
8RDM on remote control over 2 seconds to select the content of USB
for random playback function. Press direction button
control to select you liked tracks for playback.
2.If desire changing to other playback mode, you can press MODE button
to switch.
Numeric button
In radio mode
1. Press and hold any one button 1-6 on remote control for over 2 seconds to
store the radio stations to the memory you are listening.
2. From 1-6, press any one button to call out the memory.
In disc playing mode
1. Numeric buttons on remote control are used to select the tracks . If certain
segment or track has two digits, press the
digit, then press ENTER button
(eg: select track
1 once then press
5 and press
2. In disc playing mode, press and hold 7RPT button over 2 seconds means
Single song repeat/Full disc repeat/ repeat OFF.
3. In disc playing mode, press and hold 8RDM button over 2 seconds means
Random playback.
Press it again to shut off this function.
4. In DVD or VCD mode, first press
STOP on remote control, then press and
hold
9P/N over 2 seconds interchange between PAL/NTSC systems.
VCD/SVCD PBC MENU
Some VCD and S-VCD discs(especially Karaoke discs) have some menus.
They are used to select the contents you want to enjoy. This type of menu can
also be called PBC .
MENU SETUP
When playing this type of discs:
1. Press the MENU button to setup PBC.
2. Press the numeric buttons to enter the segment of the track you want to play.
While PBC shut off, you can press numeric button on remote control to select
track. While PBC turn on, press numeric button on remote control can not
select track.
Warning! If no operations are executed within 10 seconds after the PBC MENU
is displayed, the unit will continue to play from the first track.
11
button for selection of next track,
3RDM on panel or press
/
/
/
on remote
first digit, and press the second
15 ,you can press
ENTER button).
Touch screen function introduction
1
Touch this button to enter the radio mode. (See picture 1)
RADIO
2
Touch this button to enter the TV mode.
TV
now).
3
This is SD card mode, when insert SD card on panel. This unit no
CARD
SD card function now).
4
Touch this button to enter the outer AUX input mode. (See picture 4)
AUX
5
Touch this button to enter the bluetooth mode.(This unit no bluetooth
Bluetooth
function now).
6
Touch this button to enter the disc playback mode. (See picture 5)
DVD
PLAYER
7
Touch this button to enter the GPS mode.(While no GPS function,
NAV
so no this operation.)
8
Touch this button to enter the USB playback mode.
USB
9
The main interface quit button, touch this button to quit the original
QUIT
operation mode. For example: From disc playback mode to enter the main
interface, to quit means former disc playback mode.
C. AUX mode
1
Source
Picture 4
1
Source Touch this button to enter the main interface of unit to choose
other mode. see picture 3
2
Setup Touch this button to enter the function setup interface see picture
9-1/2/3/4
D. The operation of disc playback interface
9
Source
1
2
3
4
5
Picture 5
32
This unit no TV function
2
Setup
10
Setup
1
A-B
MENU
2
6
7
8
Advertisement
Table of Contents
