Panasonic HC-X2000 Owner's Manual page 208

Firmware Ver. 1.4 — Support for Simultaneous Output from <SDI OUT> Terminal and <HDMI> Terminal [X2000]
∫ When the [FREQUENCY] is set to [50.00Hz]
[REC FORMAT]
Resolution/frame rate
3840×2160/50.00p
3840×2160/25.00p
1920×1080/50.00p
1920×1080/50.00i
1920×1080/25.00p
1280×720/50.00p
* Factory setting
@
NOTE
0 There are the following limitations if [SDI + HDMI OUTPUT] is [ON]:
j [HDMI OUT FORMAT] cannot be set to [720480p]/[720576p].
j [SDI OUT FORMAT]/[HDMI OUT FORMAT] will have the same frame rate settings.
(Example) When [HDMI OUT FORMAT]/[SDI OUT FORMAT] is set to [19201080p]
If [HDMI OUT FORMAT] is set to [19201080i], then [SDI OUT FORMAT] will also be automatically set to [19201080i].
j Either one of the LCD monitor or the viewfinder only illuminates.
0 Set to the following settings in the menus when outputting only to the <SDI OUT> terminal.
j [VIDEO OUT/LCD/VF] menu  [VIDEO OUT SEL]  [SDI + HDMI OUTPUT]  [OFF]
j [VIDEO OUT/LCD/VF] menu  [VIDEO OUT SEL]  [EXTERNAL OUT SEL]  [SDI]
0 Set to the following settings in the menus when outputting only to the <HDMI> terminal.
j [VIDEO OUT/LCD/VF] menu  [VIDEO OUT SEL]  [SDI + HDMI OUTPUT]  [OFF]
j [VIDEO OUT/LCD/VF] menu  [VIDEO OUT SEL]  [EXTERNAL OUT SEL]  [HDMI]
0 When all of the following menu settings have been made, it is possible to control recording by external devices connected to the <SDI OUT> terminal
and the <HDMI> terminal.
j [VIDEO OUT/LCD/VF] menu  [VIDEO OUT SEL]  [SDI + HDMI OUTPUT]  [ON]
j [VIDEO OUT/LCD/VF] menu  [SDI SETTING]  [SDI REC REMOTE]  [ON]
j [VIDEO OUT/LCD/VF] menu  [HDMI SETTING]  [HDMI TC OUT]  [ON]
j [VIDEO OUT/LCD/VF] menu  [HDMI SETTING]  [HDMI REC REMOTE]  [ON]
To set how to turn on/off the LCD monitor and viewfinder
Sets the display method of the LCD monitor/viewfinder when [VIDEO OUT/LCD/VF] menu  [VIDEO OUT SEL]  [SDI + HDMI OUTPUT]  [ON].
1
Select [VIDEO OUT/LCD/VF] menu  [VIDEO OUT SEL]  [LCD/VF OUTPUT]  [VF PRIORITY] or [LCD].
[VF PRIORITY] When the viewfinder is closed, the LCD monitor turns on when the LCD monitor is opened.
When the viewfinder is pulled out, the viewfinder turns on and the LCD monitor turns off.
[LCD] The LCD monitor turns on when the LCD monitor is opened. The viewfinder does not turn on.
To change the setting with a USER button
You can change how to turn on/off the LCD monitor and Viewfinder by registering [LCD/VF OUTPUT] to a USER button.
1
When the recording screen is displayed, press the USER button to which [LCD/VF OUTPUT] is registered.
Switches the setting each time the button is pressed.
[VF PRIORITY] [LCD]
≥ The setting is also applied to the [VIDEO OUT/LCD/VF] menu  [VIDEO OUT SEL]  [LCD/VF OUTPUT] menu setting.
<HDMI> terminal
[HDMI OUT FORMAT]: output format
[38402160p]:
3840×2160/50.00p 4:2:2 10 bit
[38402160p(420/8bit)]:
3840×2160/50.00p 4:2:0 8 bit
*
[19201080p] :
1920×1080/50.00p 4:2:2 10 bit
[19201080i]:
1920×1080/50.00i 4:2:2 10 bit
[38402160p]:
3840×2160/25.00p 4:2:2 10 bit
*
[19201080p] :
1920×1080/25.00p 4:2:2 10 bit
[19201080p] * :
1920×1080/50.00p 4:2:2 10 bit
[19201080i]:
1920×1080/50.00i 4:2:2 10 bit
[19201080i]:
1920×1080/50.00i 4:2:2 10 bit
[19201080p]:
1920×1080/25.00p 4:2:2 10 bit
[1280720p]:
1280×720/50.00p 4:2:2 10 bit
[19201080p]
1920×1080/50.00p 4:2:2 10 bit
[19201080i]:
1920×1080/50.00i 4:2:2 10 bit
[19201080p]:
1920×1080/25.00p 4:2:2 10 bit
[19201080PsF]
1920×1080/25.00PsF 4:2:2 10 bit
[19201080p]
1920×1080/50.00p 4:2:2 10 bit
[19201080i]:
1920×1080/50.00i 4:2:2 10 bit
[19201080i]:
1920×1080/50.00i 4:2:2 10 bit
[19201080p]:
1920×1080/25.00p 4:2:2 10 bit
[19201080PsF]
1920×1080/25.00PsF 4:2:2 10 bit
[1280720p]:
1280×720/50.00p 4:2:2 10 bit
- F 5 -
<SDI OUT> terminal
[SDI OUT FORMAT]: output format
*
:
*
:
* :
*
: