Kobalt KMP 4240D-06 Manual page 15

ASSEMBLY INSTRUCTIONS
2. Removing the mulching plug
• To remove the mulching plug (I), lift the rear
discharge door (D).
• Grasp the handle of the mulching plug (I). Using
this handle, lift and pull the mulch plug out.
• The mulching plug (I) is inserted at an angle, so it
requires some force to remove.
• The mulching plug (I) must be removed in order to
install the grass catcher bag.
• The mulching plug (I) must be re-installed when the
grass catcher bag is removed.
3. Installing the grass catcher bag
• Lift the rear discharge door (D).
• Lift the grass catcher (G) by its handle and place
under the rear discharge door so that the hooks (N)
on the grass catcher are seated on the door rod.
• Release the rear discharge door (D).
4. Installing the side discharge chute
• Lift the side discharge cover (F).
• Align the grooves on the side discharge chute (H)
with the pins on the underside of the side discharge
cover (F).
• Lower the side discharge chute until the hooks on
the mower deck are secured in the openings of the
side discharge chute.
• Release the side discharge cover.
• Ensure the mulch plug is installed for side discharge
to operate correctly.
2
3
4
F
15
I
N
G
D
D
H