Advertisement
Quick Links
Advertisement
Related Manuals for Cookology CBULF600
Summary of Contents for Cookology CBULF600
- Page 1 Built-under Larder Fridge Instruction Manual MODEL CBULF600...
- Page 2 Contents Cautions---------------------------------------------------------------------------------------1~2 Diagram----------------------------------------------------------------------------------------3 Preparation------------------------------------------------------------------------------------4~5 Operation--------------------------------------------------------------------------------------6 Instruction-------------------------------------------------------------------------------------7~ Defrosting,cleaning and de-commissioning------------------------------------------10~11 Trouble shooting----------------------------------------------------------------------------12...
- Page 3 Cautions Disposal of the old appliance Before disposing an old appliance, please make sure it’s inoperative and safe. Unplug the appliance and remove or destroy all of the springs, latches, or bolt-locks in order to avoid the risk of child entrapment. It must be noted that the refrigeration system contains insulating gases and refrigerants, which require specialized waste disposal.
- Page 4 CAUTIONS Connection and installation of the appliance are not to be carried out in strict compliance with the relevant instructions set out in the User’s Guide. For the purpose of safety, the appliance must be properly earthed in accordance with specifications.
- Page 5 Refrigerator Diagram ③ ② ① ④ 1.Shelves 2.Temperature Controller 3.Egg tray 4.Bottle racks This diagram may vary slightly with the layout of the refrigerator you have just purchased due to technical improvements.
- Page 6 Preparation Unpacking Remove all packing materials. Check attachments and materials Checking should be conducted with reference to the Packing List. Contact the local distributor if discrepancies are found. Ensure proper location of the refrigerator. Clean the refrigerator before use. (See the following section “Cleaning”) Idle time After the refrigerator has been sited and cleaned, let it stand for more than 30 minutes before connecting the power source.
- Page 7 DOOR REVERSAL 1. Unplug the appliance before reversing the door opening direction. 2. Remove food from the appliance. 3. Remove caps on the front of the refrigerator body (Fig. 1, Fig 2). 4. Remove the two screws, which attach the upper hinge to the appliance door (Fig. 3). Take spe- cial care and hold the appliance door vertically.
- Page 8 Cooling Caution: Some time will be required for the refrigerator to reach the set level when temperature adjustments are made. The length of this period is determined by difference in the existing and set temperatures, the ambient temperature, the frequency with which the door is opened and closed and the amount of food in storage.
- Page 9 Instructions Cold storage is for short-term food Storage or for daily consumption. Although the temperature in most parts of the cold storage compartment can be regulated between 0 and 10 degrees Centigrade, extended periods of food storage is not recommended. Cold storage should only be used for short-term storage.
- Page 10 Lamp & Replacement: Lamp: 240V, 10W Lamp holder: E14 (lamps exceeding 15W must not be used) * For replacement, unplug to disconnect the power * Remove the lamp by turning anti-clockwise...
- Page 15 Manufacturer’s Declaration The manufacturer hereby declares that this product meets the re-quirements of the following European directives: · Low Voltage Directive 2014/35/EC · Electromagnetic Compatibility (EMC) Directive 2014/30/EC · ErP Directive 2009/125/EC · Directive RoHS 2011/65/EC and has thus been marked with the symbol and been issued with the CE symbol and been issued with a declaration of compliance made available to market regulators.
Need help?
Do you have a question about the CBULF600 and is the answer not in the manual?
Questions and answers