Troubleshooting
Code
dC
OC
LC, LC1
3C
UC
HC
56 English
WD80T4046EE_04215E-00_EN.indd 56
Operating the washer with the door open.
•
Make sure the door is properly closed.
•
Make sure laundry is not caught in the door.
Water has overflowed.
• Restart after spinning.
• If the information code remains on the display, contact a local
Samsung service centre.
Check the drain hose.
• Make sure the end of the drain hose is not placed on the floor.
• Make sure the drain hose is not clogged.
• If the information code remains, contact a customer service
centre.
Check the Motor for operation.
• Try restarting the cycle.
• If the information code remains, contact a customer service
centre.
The electronic control needs to be checked (Over Voltage Error).
•
Check the PCB and wire harness.
•
Check if power is supplied properly.
•
If the information code remains, contact a customer service
centre.
Low voltage detected.
• Check if the power cord is plugged in.
• If the information code remains, contact a customer service
centre.
High temperature heating check.
• If the information code remains, contact a customer service
centre.
Action
2021/2/3 17:17:56