Table of Contents
Advertisement
Cleaning and maintenance
5.7
Shutting down
Drain the freshwater tank and the water supply system completely if you are going to
take the toilet out of service for an extended period of time.
➤ Clean the toilet carefully (chapter "Cleaning and maintenance" on page 18).
➤ Operate the flush button until no more water is in the pipes.
➤ Interrupt the power supply to the toilet.
➤ Then drain the cassette tank and rinse it out carefully. Clean the cassette. To allow
the cassette tank to dry, do not close the drain pipe.
➤ Clean and grease all seals and moving parts of the toilet and the cassette tank
(chapter "Cleaning and maintenance" on page 18) and repeat this operation
before putting the toilet back into service.
6
Cleaning and maintenance
!
CAUTION!
Cleaning agents for the toilet may not contain chlorine or alcohol!
A
NOTICE!
•
To prevent material changes, do not use hard, abrasive or
soda-based cleaning agents (scouring agents).
•
Do not use polish for cleaning.
I
NOTE
•
Clean and grease all seals on the toilet and cassette tank regularly.
In case of frequent use, perform these actions monthly or after
3 – 5 drainings of the cassette. Use grease or silicone-based spray.
•
For regular cleaning of the toilet bowl, use a mild colourless cleaning
agent.
➤ Clean the toilet regularly inside and out with a soft cloth and lukewarm water with
a mild cleaning agent.
➤ Then wash the surfaces with clear water.
The manufacturer recommends:
•
®
Grease: OKS
1110
•
Silicone spray: OKS
18
®
1111
CT4000
EN
Advertisement
Table of Contents
