Place The Turntable Inside; Operation; Setting The Clock - Silvercrest 107212 Operating Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

• Insert the plug into a mains power socket. Use a
230 - 240 V ~ , 50 Hz, mains power socket
with a 16 A fuse. We recommend that the
microwave is powered by its own mains circuit.
If you are unsure about how to connect the mi-
crowave oven, consult a specialist.
Before the first regular usage of the microwave oven
the appliance must be heated up to remove any re-
maining production residues.
Once you have plugged the plug into the socket,
open the microwave door once by pressing the
Door opener button 2.
Switch the appliance on in grill operating mode
without foods and without accessories (turntable 3
and grill stands t):
Note on heating up for
the first time
When heating up for the first
time, operate the microwave
without food or accessories.
Operate the microwave for a ma-
ximum of 5 minutes when empty!
Press the Grill button 7
appear in the display 1.
Turn the rotary knob r
and the
and
display 1, then confirm the selection by pres-
sing the Start/quick start button r
Use the rotary knob r
time of 5 minutes.
. "Gr 1" will
, as far as "Gr 3"
symbols appear in the
.
to set a cooking
Press the Start/quick start button r
start the grill process.
Note:
Light smoke generation and a slight smell can
occur on first usage, this is due to production
residues. These are not harmful. Provide sufficient
ventilation. For example, open a window.
After 5 minutes the appliance will switch itself
off automatically. Wait until it has cooled down
completely.
Remove the plug from the mains power socket
then, after cleaning the appliance with a moist
cloth, dry it carefully.

Place the turntable inside

Place the turntable 3 centrally over the axle in
the cooking compartment. Ensure that it slides
completely onto the axle and is firmly seated.

Operation

Setting the Clock

After inserting the mains plug into the socket, open
the microwave door once. The display 1 shows
"1:00". Re-close the door.
1. Press the Clock button q
in the display 1.
2. Select the required mode (Hr 24 or Hr 12) by
turning the rotary knob r
your selection by pressing the Start/quick start
button r
- 12 -
. "Hr 12" appears
and then confirm
.
to

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smw 900 eds b3

Table of Contents