Standby Mode; Setting The Kitchen Timer; Child Lock; Query Functions - Silvercrest 107212 Operating Instructions Manual

Note:
The time display will only appear once you turn
the rotary knob
to set the hour.
3. Select the required hour by turning the rotary
knob r
and confirm your selection by
pressing the Start/quick start button r
4. Select the required minutes by turning the rotary
knob r
and confirm your selection by
pressing the Start/quick start button r
The time display is now programmed.
To read the current time while the microwave is in
operation, press the Clock button q
is then shown in the display 1 for a few seconds.

Standby mode

The microwave automatically switches over to stand-
by mode, and the time is displayed, if no button is
pressed for a longer period. The display illumina-
tion also dims a few seconds after switching over
to standby mode.

Setting the kitchen timer

The microwave oven is provided with a kitchen timer
which you can use independently of the microwave
operation.
Press the TIMER button w while the appliance
1.
is in standby mode. "0:00" is shown in the
display 1 along with symbol
2. Now set the required time using the rotary knob
r
. You can select any time range from
10 seconds to 95 minutes.
r again, which enables you
; the time
.
Press the Start/quick start button r
3.
The appliance emits an acoustic signal. The
countdown begins. After approx. 3 seconds
the current time is shown once again. The
kitchen timer will continue to run in the back-
ground. If you want to check the kitchen timer
inbetween times, press the TIMER button w.
. The kitchen timer appears for a moment.
As soon as the set time period has expired, signal
tones sound.
.

Child lock

Engage this setting to prevent accidental activation
by children and other persons not familiar with the
operation of the appliance.
The symbol for the child lock
display 1 , which means that the appliance cannot
be operated as long as this function is activated.
• Press the Stop/child lock button e
hold it down until a signal tone is sounded and
the symbol for the child lock
the display 1. The buttons and the control dial
now no longer have a function.
• To deactivate the child lock, press the Stop/child
lock button e
a signal tone is sounded and the symbol for the
child lock

Query functions

Query the time during operation
During the cooking process, press the Clock
button q
seconds in the display 1.
Query the power level operation
During the cooking process, press the Microwave
button 6
appear for a few seconds in the display 1.
- 13 -
appears in the
and hold it down until
goes out.
. The time will appear for a few
. The activated power level will
.
and
appears in