Audio Menu Options - ProScan 32LB45Q User Manual

Setup menu operation – Audio menu options
Press MENU on the side panel or on the remote control and then use
button to enter it (see the picture below).
1. Use to select what you want to adjust in the AUDIO menu.
/
2. Press ENTER or
3. When you are satisfied with your adjustment. Press MENU to exit.
Balance
Press button to select it and then use
/
Bass
Press button to select it and then use
/
Treble
Press button to select it and then use
/
Sound Mode
You can use the presetting sound (User / Voice / Concert / Jazz)
You may select the sound mode directly by pressing the SOUND button on the remote control.
Surround Sound
Press button to select it and then use to select the surround sound on or off.
/
Digital Audio Output (Coaxial Out )
Press button to select it and then use to select the one of mode of the digital audio output such as PCM and RAW or
/
off.

AUDIO MENU OPTIONS

button to adjust (according to the guiding sign in the bottom right corner of the menu).
/ to adjust the audio output between left and right speakers.
/ to increase or decrease the level of the lower-pitched sounds.
/ to increase or decrease the level of the higher-pitched sounds.
/ to select the AUDIO menu, press ENTER
20