Engaging The Blades; Disengaging The Blades - Toro TimeMaster 21200 Operator's Manual

2. When the engine shuts off, remove the ignition
key and take it with you when you leave the
machine (B of Figure
Figure 19

Engaging the Blades

When you start your engine, the blades do not turn.
You must engage the blades to mow.
1. Pull the blade-control-bar lock back to the
blade-control bar
Figure 20
1. Blade-control bar lock
2. Slowly pull the blade-control bar back to the
handle (Figure 20).
3. Hold the blade-control bar against the handle
(Figure 21).
18).
(Figure 20).
2. Blade-control bar

Disengaging the Blades

Release the blade-control bar
g234920
Important:
When you release the blade-control
bar, the blades should stop within 3 seconds.
If they do not stop properly, stop using your
machine immediately and contact an Authorized
Service Dealer.
g016484
18
Figure 21
(Figure 22).
Figure 22
g193334
g193345