Table of Contents
Advertisement
114
3-2. Opening, closing and locking the doors and trunk
■
Switching the door unlock function (some models)
It is possible to set which doors the entry function unlocks using the wireless
remote control.
Turn the power switch off.
1
2
When the indicator light on the key surface is not on, press and hold
or
.
The setting changes each time an operation is performed, as shown below.
(When changing the setting continuously, release the buttons, wait for at least
5 seconds, and repeat step
Multi-information
display
To prevent unintended triggering of the alarm, unlock the doors using the
wireless remote control and open and close a door once after the settings
have been changed. (If a door is not opened within 60 seconds after
pressed, the doors will be locked again and the alarm will automatically be
set.)
In case that the alarm is triggered, immediately stop the alarm. (→P. 81)
■
Using the mechanical key
The doors can also be locked and unlocked with the mechanical key.
(→P. 422)
■
Conditions affecting the operation of the smart key system or wireless
remote control
→P. 126
■
Customization
Settings (e.g. unlocking function using a key) can be changed.
(Customizable features: →P. 461)
for approximately 5 seconds while pressing and holding
.)
2
Unlocking function
Holding the driver's door han-
dle unlocks only the driver's
door.
Holding a passenger's door
handle unlocks all the doors.
Holding either front door han-
dle unlocks all the doors.
Beep
Exterior:
Beeps
times
Interior: Pings once
Exterior: Beeps twice
Interior: Pings once
,
3
is
Advertisement
Table of Contents
