Table of Contents
Advertisement
1886
Secure each blade to a blade iron as shown using the blade nuts and grommets, found in
the
hardware bag, and the blade assembly screws, found in the
Repeat x5
7
Ceiling Bracket
Downrod
Installing the Canopy
Lift the canopy into place so that
the screw holes are aligned.
Installing the Blades:
hardware bag.
Hanging Fan
Wiring
Insert the two canopy screws
found in the
hardware bag.
x15
Blade Screw
bag
IMPORTANT
NOTE: Follow the instructions on the blade. Installing it
incorrectly could result in your fan not functioning.
Lightly attach the blade arms to the
motor with the blade arm screws,
then securely tighten after both
screws are attached.
Canopy
Blades
x2
Canopy
Screw
bag
x15
Blade Nut
bag
x15
Grommet
Remember the screws that
you kept after removing the
shipping blocks? You need
them here.
x10
Blade Arm Screw
Repeat x5
Note:
Fan style may vary.
Light
Glass/Bulbs
Advertisement
Table of Contents
