Features; Important Safeguards; Special Instructions - Proctor-Silex 17300 Use And Care Manual

840091500 Ev01.qxd 1/8/02 10:37 AM Page 2
1. Water Tank Opening
2. Adjustable Steam
Dial
3. Spray Button
(optional)
4. Pivoting Cord
5. Heel Rest
6. Temperature
Control Dial
7. Power On Light
8. Soleplate
9. Water Window
1. Orifice de remplissage
du réservoir
2. Cadran de vapeur
réglable
3. Bouton de vaporisation
(facultatif)
4. Cordon pivotant
5. Talon d'appui
6. Cadran de réglage de
la température
7. Témoin de
fonctionnement
8. Semelle
9. Repère de niveau d'eau
1. Apertura del tanque de
agua
2. Control de vapor
ajustable
3. Botón de rocío
(opcional)
4. Cable giratorio
5. Base de descanso
6. Control de
temperatura
7. Luz de encendido
8. Suela
9. Ventana de agua
2

IMPORTANT SAFEGUARDS

When using your flat iron, basic safety precautions should always be
followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING
1. Use iron only for its intended use.
2. Verify that the voltage in your home corresponds to that of your
appliance.
3. To protect against risk of electric shock, do not immerse the iron
in water or other liquids.
4. The iron should always be turned to OFF before plugging
or unplugging from outlet. Never yank cord to disconnect from
outlet; instead, grasp plug and pull to disconnect.
5. Do not allow cord to touch hot surfaces. Let iron cool completely
before putting away. Loop cord loosely around iron when storing.
6. Always disconnect iron from electrical outlet when filling with
water or emptying and when not in use.
7. Do not operate iron with a damaged cord or if the iron has been
dropped or damaged. To avoid the risk of electric shock, do not
disassemble the iron. Call our toll-free customer service number
for information on examination, repair or electrical or mechanical
adjustment. Incorrect reassembly can cause a risk of electric
shock when the iron is used.
8. Close supervision is necessary for any appliance being used by
or near children. Do not leave iron unattended while connected
or on an ironing board.
9. Burns can occur from touching hot metal parts, hot water, or
steam. Use caution when you turn a steam iron upside down –
there may be hot water in the reservoir.

SPECIAL INSTRUCTIONS

1. To avoid a circuit overload, do not operate another high wattage
appliance on the same circuit.
3