Notes On Installation - Klarstein VINSIDER 30 UNO Manual

EN
26

NOTES ON INSTALLATION

• Place the wine cooler on a flat, firm surface. The base must be hard and
non-combustible. Do not place the wine cooler on the foam pad from the
packaging to elevate it.
• Splash water and dirt should be wiped off with a soft cloth to prevent rust and
not impair the electrical insulation properties.
• The wine cooler should not be placed near heat sources or directly in the sun.
• Only connect the wine cooler to earthed sockets.
Ventilation distances
Ventilation distance of at least 50 mm