Table of Contents
Advertisement
6.3 Program
Reminder: From the Zones Menu use the Move Right key to advance through the PROGRAM
Menu.
Pressing Enter to access the Program Menu will again disable the panel and the LED's will illuminate as
they did in the Systems Menu.
The PROGRAM Menu consists of;
Zones
Zones
Press Enter and the Zones Menu will be displayed on the LCD screen. Pressing Enter again will access the
Zones sub menu where first the Move Right and Move Left keys are used to select the Zone
number and the Move Up and
Move Down keys are used to set the functions within that Zone. The functions are;
Normal
Normal is selected if the Zone is required to initiate an alarm and latch until reset.
AVF
If AVF, ( Alarm Verification Facility ) is set active a delay and re-sampling period is initiated to confirm an
alarm condition actually exists on that Zone.
Non Latch
Non Latch if set will initiate an alarm only when the Zone is in alarm.
SRESET 60
Resets the Zone 60 seconds after the Zone comes out of alarm.
Reminder: Press Cancel to return to the Zones Menu and then
Clock menu.
Clock
MCP Zone
Sounders
Indicate
ZONE 2
NORMAL
Outputs
Display
Zone Labels
ZONE 4
AVF
Samp
le Zone Screens
MAN1564-3
Relays
Fire Fan
EOL
Zone S/C
ZONE 6
AGENT 1
Move Right to access the
23
Advertisement
Table of Contents
