Table of Contents
Advertisement
3.4 Liquid Crystal Display
The panel is fitted with an 8 x 2 LCD. Its primary purpose is to display Zone alarm / fault / isolate
information and prompts for system commands come programming. Alarm, Fault and Isolate
information is accessed through the Main Menu. When the FACP is in its normal state a default screen
will be displayed. Examples of LCD Displays are;
AMPAC
MON 12 : 58
Default Screen
Note: Some of the following sub-menus will not be available if the facility has not been installed, eg.
Brigade, Relays, Fire Fan, Agent Release, Sounder, and / or Input boards / cards / modules. If one of
the above ancillary facilities has been fitted retrospectively it must be appropriately programmed into
the FACP via the SYSTEM and PROGRAM MENUS, if not a System Fault will be indicated. Once
programmed into the FACP the ancillary facility is monitored in the normal way. Refer to the SYSTEM
and PROGRAM MENU structure diagrams in the Appendix for more information.
Press ENTER to access MAIN MENU
3.5 Main Menu
The Main Menu consists of;
Level 1
STATUS
Press the
Move Right /
Press Enter to access the sub – menus.
Move Right to access STATUS
F1 / 2
BATTERY
Fault 1 off 2 Battery Fault
Level 2 Activate Control
FAULTS
TEST
Move Left key to move through the menu.
F1 / 1
CHARGER
Fault 1 off 1 Charger or Power Fault
Level 3 Enter Password
DISABLES
SYSTEM
MAN1564-3
PROGRAM
10
Advertisement
Table of Contents
