Table of Contents
Advertisement
Insert all four sleeves.
2.
a) Clip the hoses securely in the
holders.
b) Clip the mains cable securely in
the holders.
c) Insert and tighten the screws.
Positioning and connecting
Before switching on the appliance
again:
Notes
The support struts must be
■
removed.
~ Page 16
The transport braces must be
■
removed.
~ "Removing the transport locks"
on page 14
Pour approx. 1 litre of water into
■
dispenser II, select the Drain
programme and start.
This will prevent detergent from
flowing straight into the drain during
the next wash.
en
21
Advertisement
Table of Contents
