TECHNICAL FEATURES LIFE home integration reserves the right to make changes to technical characteristics at any time and without prior notice, without changing its intended use and function. ACER: Irreversible electromechanical opera tor for sliding gates with optical/magnetic encoder and built-in ECU ECU - 24 V d.c.
Page 4
1.2 Installing operator components: positioning and installation of the anchorage plate The area in which the operator is installed must provide adequate space for performing maintenance and manual release operations. a) Adhere to the dimensions in g.2. Fig. (2) AC003a Fig.
Page 5
1.3 Installing operator components: positioning and installation of the operator a) Remove the lid (2) of the operator by loosening the screws (1); rest the operator on the anchorage plate and manually turn the 4 M10 screws (7) with the relative washers through 3/4 of a revolution. See g. (5.1). b) Vertically adjust the operator using the 4 dowels (8) levelling it with the spanner (9);...
2.0 WIRING AND CONNECTIONS • The operator must be connected to the relative Life electronic control unit (ECU). • All wiring and connection operations must be carried out with the control unit disconnected from the electricity supply. If the disconnection device is not in view, display a sign reading: “ATTENTION: MAINTENANCE WORK IN PROGRESS”.
Page 7
(and will hereinafter be referred to as manufacturer) and the owner of all rights concerning this The Manufacturer’s information required by Machinery Directive 98/37/EC is given below: • Manufacture: LIFE home integration • Address: Via Sandro Pertini 3/5 – 31014 COLLE UMBERTO (TV) Italia • Telephone: + 39 0438 388592 •...
Instructions and warnings for installation • Before commencing installation read the SAFETY INSTRUCTIONS AND WARNINGS chapter carefully. • The person who installs the operator is responsible for performing risk analysis and regulating the automation’s safety devices consequentially. • Before commencing installation, check whether further devices or materials are needed to complete the automation in order to suit the specific situation in which it will be used. •...
Declaration of conformity under Directive 98/37/EC, appendix II, part B (Manufacturer’s Declaration of CE Conformity) LIFE Home Integration Via S.Pertini 3/5 31014 COLLE UMBERTO (TV) declares that the following product: ACER operator for sliding gates Satisfies the essential requisites established in the following directives: •...
Need help?
Do you have a question about the AC 8R DL and is the answer not in the manual?
Questions and answers