Installation Checklist - Washtech CD240 Operator's Manual

Installation Checklist

Check
DELIVERY
SUPPLIED COMPLETE?
POSITION
LEVEL AND STABLE?
WATER
ISOLATOR VALVE FITTED?
TEMPERATURE CORRECT
PRESSURE CORRECT (200 – 350 kPa)?
FLOW RATE CORRECT (> 20L per min)?
QUALITY WITHIN REQUIREMENTS?
POWER
ISOLATING SWITCH
CORRECT SUPPLY
WASTE
CONNECTION TO 50mm PIPE?
CHEMICALS
DETERGENT
RINSE FLUID
MACHINE OPERATION
MACHINE RUNNING CORRECTLY?
CHEMICAL DOSAGE CORRECT?
ALL OPERATIONS CORRECT?
OPERATOR TRAINING
ENSURE THAT THE CUSTOMER HAS BEEN GIVEN THE OPERATION MANUAL AND WALL CHART, AND IS AWARE OF THE
IMPORTANCE OF BOTH USING AND CLEANING THE MACHINE CORRECTLY
START UP
PRE-RINSE AND RACKING
DRAINING THE MACHINE
SHUT-DOWN AND DAILY CLEANING
WEEKLY MAINTENANCE
PLANNED SERVICNG
12/5/2022
Notes
CHECK THERE HAS NOT BEEN ANY TRANSIT DAMAGE
ON SOUND, WATERPROOF, SELF-DRAINING FLOOR
ACCESSIBLE, ALL FITTINGS SOUND, AND NO LEAKS
HOT WATER INLET 65˚C
LIMITER FITTED IF ABOVE RANGE, RINSE PUMP IF BELOW
RINSE PUMP FITTED IF BELOW REQUIREMENT
FILTER OR SOFTENER IN PLACE IF OUTSIDE REQUIREMENTS
FITTED, FUNCTIONAL AND ACCESSIBLE
VOLTAGE, CURRENT, CIRCUIT BREAKER ALL CORRECT
CORRECT CONNECTION TO PLUMBING
CHEMICAL NAME
MULTIPLE CYCLES RUN, NO ISSUES
CORRECTLY FLOWING INTO MACHINE, NO FOAMING
FILL LEVEL CORRECT, NO DRAINAGE ISSUES
BETTER TO RINSE PLATES THAN REMOVE WASTE FROM MACHINE
DRAIN THE MACHINE DAILY
CHECK WASH ELEMENTS HAVE COOLED BEFORE CLEANING
FULL MACHINE CLEAN INCLUDING WASH/RINSE ARMS
IMPORTANCE OF HAVING MACHINE SERVICED REGULARLY
Washtech CD240L Operator Manual
CONTAINER NO LEAKS PRIMED CALIBRATED
8