Operator Care - Prewash Zone - Washtech CD240 Operator's Manual

Operator Care – Prewash Zone
CD240 Prewash Zone
• Part #: CD240 Prewash Zone
• Date: 22/04/2022
• Version: 1-A
Daily Cleaning
• Remove Scrap Tray (1) and clean with a brush and water to clear grid.
• Remove Prewash Pump Inlet Filter (3) and clean with a brush and water to clear grid.
• Return Drain Upstand (2), Prewash Pump Inlet Filter (3) and Scrap Tray (1) to the machine.
Weekly Cleaning
• To be done in conjunction with Daily cleaning.
• Remove Lower Wash Arms (4) – lift up to unhook the arm and then withdraw.
• Remove Upper Wash Arms (5) – push the locking bar up and then withdraw the arm.
Check to ensure arms are clear of obstructions. Remove end caps to clear if not.
•
Flush Arms (4 & 5) with water. Use a toothpick or paper clip if necessary to clear jets.
•
• Return Prewash Pump Inlet Filter (3), Drain Upstand (2), Scrap Tray (1),
Lower Wash Arms (4) and Upper Wash Arms (5) to the machine.
12/5/2022 Washtech CD240L Operator Manual 11