Installing The Recoil-Starter Rope In The Rope Guide - Toro Super Recycler 20383 Operator's Manual

Figure 6
4. Lock the handle at your desired height; refer to
Adjusting the Handle Height (page
5. Torque the handle bolts to 14 to 17 N∙m (120
to 160 in-lb).
6. Adjust the cutting height; refer to
Cutting Height (page
12).
Adjusting the
11).
3
Installing the Recoil-starter
Rope in the Rope Guide
No Parts Required
Procedure
Important:
To start the engine safely and easily
whenever you use the machine, install the
recoil-starter rope in the rope guide.
Pull the recoil-starter rope through the rope guide on
the handle (Figure
g017458
1. Recoil-starter rope
7
7).
Figure 7
2. Rope guide
g003251