Supermicro X11DPH-I User Manual page 15

Peripheral Devices
•
Four (4) USB 3.0 ports on the I/O back panel (USB 0/1, USB2/3)
• One (1) USB 3.0 header with two (2) USB connections for front access (USB4/5)
•
One (1) USB 3.0 Type A header (USB6)
BIOS
•
64MB SPI AMI BIOS® SM Flash UEFI BIOS
•
ACPI 3.0 or later, USB keyboard, Plug-and-Play (PnP), SPI dual/quad speed support, and SMBIOS 2.7 or later
Power Management
•
ACPI power management
•
SuperDoctor® 5
•
Power button override mechanism
• Power-on mode for AC power recovery
•
Intel® Intelligent Power Node Manager 4.0 (available when the Supermicro Power Manager [SPM] is installed and a
special power supply is used
•
Management Engine (ME)
System Health Monitoring
•
Onboard voltage monitoring for +5V, +/-12V, +3.3V Standby, +5V Standby, HT, memory, PCH temperature, system
temperature, and memory temperature
•
6+1 CPU switch phase voltage regulator for CPU1
•
5+1 CPU switch phase voltage regulator for CPU2
•
CPU thermal trip support
• Status monitor for on/off control
•
CPU Thermal Design Power (TDP) support of up to 165W
Fan Control
•
Fan status monitoring via IPMI
• Eight 4-pin fan headers
•
Dual cooling zone
•
Multi-speed fan control via onboard BMC
System Management
•
Trusted Platform Module (TPM) support
•
PECI (Platform Environment Control Interface) 2.0 support
•
System resource alert via SuperDoctor® 5
•
SuperDoctor® 5, Watch Dog, NMI, RoHS
•
Power supply monitoring
•
Chassis intrusion header and detection (when an optional external speaker is connected to the onboard speaker header
at JD1)
Motherboard Features
15
Chapter 1: Introduction